Instructions for Use

Getting Started
Please fully charge the device with the supplied USB cable before use. You can charge the device both directly at an electrical socket or at a PC. The charging time is about 2 hours. When the device is removed from the charger, it flashes in all three colours (red, blue, green) and is on. The battery lasts about 1 week after being fully charged.

Signals
Device flashes BLUE: GENII ® is charging
Device flashes GREEN: GENII ® is fully charged
Device flashes in all three colors: GENII ® is switched on or off

If the light flashes three times during the program check (one click on the button) or during the program change (two clicks on the button), the battery is almost empty.

Use
The GENII ® is operated exclusively via the button on the side.
You'll receive feedback via an LED light that lights up at the push of a button through the housing.

ON/OFF
By pressing and holding the control button for about 3 seconds, GENII ® is will be switched on or off. The device flashes in three colours as confirmation.

PROGRAM CHANGE
By briefly pressing the button twice, you can switch between the three programs.

APPLICATION CONTROL
A single short press on the button illuminates the GENII ® in the colour of the current program.

CLEANING & REPAIR
Clean the GENII ® with a damp cloth. Do not use harsh detergents or substances containing diluents, benzene or other organic solvents to clean the device.

FURTHER INFORMATION
You can wear GENII ® as long as you like. The more you accustom your body to the positive effects, the better you will feel.
If the desired effect does not occur immediately, don't give up! It may take up to 3 weeks for the body to adjust to the effects of the GENII ® . Give your body time to feel the optimal effect.

Technical Information

Operating temperature range: -10 ° C to + 40 ° C
Moisture: 85% or less
Dimensions GENII® unit: 38x30x8.5mm (LxWxH)
Battery: 0.4 Wh lithium-polymer battery